Series 3 88 and 109 " 4 cylinder bulkheads
Price: £2600.00 (£3120 inc VAT)
Technical Specifications
Production Dates
1971 to 1984 - Series 3 88 and 109 inch 4 cylinder bulkheads
Over the course of production, The Rover Co. engineers made multiple incremental improvements to their bulkheads, but only ever used two Part Numbers, so Pegasus has introduced ‘Type’ numbers designed to easily identify which bulkhead you require, based on the month and year of when your Land-Rover went into production.
The following dates (listed below) are provisional and are based on actual production dates. The Vehicle Registration date is no guide to the Build Date.
how to identify your bulkhead type
- 1
choose the exact copy of your original bulkhead
Select from the list below the month and year your Land-Rover went into production. Refer to the build date in your log book or heritage certificate. - 2
use the check list to review significant features
If you are unsure of the exact production date, use the drop down list below to reveal significant features against your old bulkhead. - 3
buy online and we will arrange the shipping
Place your order by clicking on the drop down lists below and select 'Order This Bulkhead' or contact us today if you need further assistance.
It is the finer details that make the perfect restoration and perfection is all we accept at Pegasus Bulkheads
Provisional specification:
- Short rain channels x 2 off.
- All UNF threaded fasteners.
- Gearbox Tunnel with vestigial Series 2a access hole to Clutch Slave Cylinder bleed nipple.
- Inner Ventilator Panel with Series 2a style large bottom flanges and ‘A’ pillar design.
- Series 2a style Internal Stiffeners, Inner Vent to Door Pillars (PSK 3054 and 3055)
- ‘Small’ wiring ducts.
Picture shows 3D CAD image.
Not sure which bulkhead you require?
We are here to help. Contact Us or call 0044 1737 301483.
Our Land-Rover Series 3 (1971 only) Bulkheads
These bulkheads are not mass produced or a ‘one-size-fits-all’. They are specifically built to replicate the exact look and feel of Land-Rover’s signature design; specially made to order for you in our UK factory. All of our bespoke bulkheads are surface finished in red-oxide primer as standard, with a choice of other finishes at an extra cost. No matter what quality you choose, you’ll be getting an exceptional well built bulkhead that will increase the expected life span of your Land-Rover by at least another 30 years.
Proudly Made In The UK
Our bespoke bulkheads, on average, typically take 7 working days to make in our UK factory and ready for delivery. Once complete your bulkhead will be packaged up and delivered ready to sit perfectly on your Land-Rover Series 3 chassis. Say goodbye to long lead times and quality issues. Every step of our bulkhead production is carried out in England.
Provisional specification:
- Long Rain Channel.
- All UNF threaded fasteners except metric Door Check captive nuts.
- Gearbox Tunnel with plain RH side, no access hole.
- Inner Ventilator Panel with Series 2a style large bottom flanges and ‘A’ pillar design.
- Series 2a style Internal Stiffeners, Inner Vent to Door Pillars (PSK 3054 and 3055)
- ‘Small’ wiring ducts.
Not sure which bulkhead you require?
We are here to help. Contact Us or call 0044 1737 301483.
Our Land-Rover Series 3 (1972 to 1973) Bulkheads
These bulkheads are not mass produced or a ‘one-size-fits-all’. They are specifically built to replicate the exact look and feel of Land-Rover’s signature design; specially made to order for you in our UK factory. All of our bespoke bulkheads are surface finished in red-oxide primer as standard, with a choice of other finishes at an extra cost. No matter what quality you choose, you’ll be getting an exceptional well built bulkhead that will increase the expected life span of your Land-Rover by at least another 30 years.
Proudly Made In The UK
Our bespoke bulkheads, on average, typically take 7 working days to make in our UK factory and ready for delivery. Once complete your bulkhead will be packaged up and delivered ready to sit perfectly on your Land-Rover Series 3 chassis. Say goodbye to long lead times and quality issues. Every step of our bulkhead production is carried out in England.
Provisional specification:
- Long Rain Channel.
- All UNF threaded fasteners except metric Door Check captive nuts.
- Gearbox Tunnel with plain RH side, no access hole.
- Inner Ventilator Panel, Series 3 style with notched top side flanges.
- Internal Stiffeners, Series 3 style with notched sandwiched flanges.
- ‘Small’ wiring ducts.
Not sure which bulkhead you require?
We are here to help. Contact Us or call 0044 1737 301483.
Our Land-Rover Series 3 (1974 to 1975) Bulkheads
These bulkheads are not mass produced or a ‘one-size-fits-all’. They are specifically built to replicate the exact look and feel of Land-Rover’s signature design; specially made to order for you in our UK factory. All of our bespoke bulkheads are surface finished in red-oxide primer as standard, with a choice of other finishes at an extra cost. No matter what quality you choose, you’ll be getting an exceptional well built bulkhead that will increase the expected life span of your Land-Rover by at least another 30 years.
Proudly Made In The UK
Our bespoke bulkheads, on average, typically take 7 working days to make in our UK factory and ready for delivery. Once complete your bulkhead will be packaged up and delivered ready to sit perfectly on your Land-Rover Series 3 chassis. Say goodbye to long lead times and quality issues. Every step of our bulkhead production is carried out in England.
Provisional specification:
- Long Rain Channel.
- All UNF threaded fasteners except metric Door Check captive nuts and Windscreen Clamp rivnuts.
- No Gearbox Tunnel. Bulkhead design is rationalised to accept 4-cylinder or V8 tunnel.
- Inner Ventilator Panel, Series 3 style with notched top side flanges.
- Internal Stiffeners, Series 3 style. Fully formed sandwiched flanges.
- ‘Large’ wiring ducts.
Not sure which bulkhead you require?
We are here to help. Contact Us or call 0044 1737 301483.
Our Land-Rover Series 3 (1975 to 1983) Bulkheads
These bulkheads are not mass produced or a ‘one-size-fits-all’. They are specifically built to replicate the exact look and feel of Land-Rover’s signature design; specially made to order for you in our UK factory. All of our bespoke bulkheads are surface finished in red-oxide primer as standard, with a choice of other finishes at an extra cost. No matter what quality you choose, you’ll be getting an exceptional well built bulkhead that will increase the expected life span of your Land-Rover by at least another 30 years.
Proudly Made In The UK
Our bespoke bulkheads, on average, typically take 7 working days to make in our UK factory and ready for delivery. Once complete your bulkhead will be packaged up and delivered ready to sit perfectly on your Land-Rover Series 3 chassis. Say goodbye to long lead times and quality issues. Every step of our bulkhead production is carried out in England.
Provisional specification:
- Long Rain Channel.
- All UNF threaded fasteners except metric Door Check captive nuts and Windscreen Clamp rivnuts.
- No Gearbox Tunnel. Bulkhead design is rationalised to accept 4-cylinder or V8 tunnel.
- Inner Ventilator Panel, Series 3 style with notched top side flanges.
- Internal Stiffeners, Series 3 style. Fully formed sandwiched flanges.
- ‘Large’ wiring ducts.
- Door Pillars designed to accept one piece weather-strips.
Not sure which bulkhead you require?
We are here to help. Contact Us or call 0044 1737 301483.
Our Land-Rover Series 3 (1984 only) Bulkheads
These bulkheads are not mass produced or a ‘one-size-fits-all’. They are specifically built to replicate the exact look and feel of Land-Rover’s signature design; specially made to order for you in our UK factory. All of our bespoke bulkheads are surface finished in red-oxide primer as standard, with a choice of other finishes at an extra cost. No matter what quality you choose, you’ll be getting an exceptional well built bulkhead that will increase the expected life span of your Land-Rover by at least another 30 years.
Proudly Made In The UK
Our bespoke bulkheads, on average, typically take 7 working days to make in our UK factory and ready for delivery. Once complete your bulkhead will be packaged up and delivered ready to sit perfectly on your Land-Rover Series 3 chassis. Say goodbye to long lead times and quality issues. Every step of our bulkhead production is carried out in England.
Jig Aligned
Assembled on several major assembly jigs, which locate key mounting points throughout the build process.
Universal Fitment
Built to 'universal' RHD or LHD specification.
Primer Coated
Surface finished with red-oxide, ready for the next paint process.
Ready To Fit
Made to fit exactly like the original manufacturers specification; endorsed by classic car insurers.
customer feedback
Jim
Ohio, United States
Land Rover Nada 6 Cylinder Bulkhead
Pegasus provided many of the parts that made the restoration possible.
Gordon
Bristol, UK
Land-Rover Series 2 Bulkhead
I am a very happy bunny and a satisfied customer of Pegasus.
Chris and Linda
Late Series 1 Bulkhead
... found that everything lined up perfectly. The doors fit and close, the windscreen fits, the vent flaps and seals fit, the door seals fit - a great result!
John from New Zealand, 22nd December 2021
Land-Rover Forward Control 2B bulkhead
Just a line to let you know that the Land-Rover Forward Control 2B bulkhead arrived today ! Hoorah !! .... The crate was certainly up to the job, thank you!
Pegasus finest detailing
Manufactured To Match The Year And Month Your Land-Rover Went Into Production
Not only will your bulkhead fit like the original, last like it’s original, it has all the same features as the original too!
Our Process
“We would like to think, that if one of the original assembly workers at the Rover factory in Solihull, viewed our bulkheads today, he would find it very difficult to detect any differences to the original”.
Made Stiffer, Stronger and Corrosion Free
Our parts are fabricated with minimal pressing, preserving metal thickness. Using modern design and materials, we have improved performance by strengthening and stiffening weak points by 50% compared to the original bulkhead. This means that not only does the bulkhead maintain its original appearance, but it is also more durable and long-lasting.
Individual Components
We utilize our own designs and patterns to cut and shape the final parts. We have invested in advanced tooling to create a bulkhead that is comparable to Rover's original engineering. Pegasus have extensive experience in sheet metal work and are able to replicate all original pressing details, holes, spire nut locations, and footwell ribs.
Spot Welded Like The Originals
Pegasus bulkheads are constructed using the same spot welding method as the original bulkheads. The majority of the parts are joined together using spot or TIG welding to create sub-assemblies, which are then assembled into the final assembly. To ensure precise bulkhead geometry, the assembly is constructed on a 36 reference point jigs.
Final stage welded
Pegasus utilize TIG welding on the final assembly for heavy-duty brackets, lap joints, and butt joints. The heavy-duty brackets such as the bonnet hinges, tie rod brackets, and bottom feet are also welded into place using TIG welding to replicate the original oxy-acetylene welding method. We maintain the highest standards in our manufacturing process and have complete control over the quality of each finished bulkhead.
Why Choose Pegasus?
Technical excellence, outstanding craftmanship and an inexhaustible supply of Land-Rover knowledge.
When you choose Pegasus, you’re choosing a passion for perfection.
Made by hand in the UK, Pegasus have completed extensive research to the point where we can identify exactly which type of bulkhead you require, based on the year and month your Land-Rover went into production.
Each part has been reverse-engineered and accurately CAD drawn, generating very precise manufacturing drawings to replicate Rover’s original specifications.
All component parts are laser cut and CNC folded. The bulkhead assembly is then authentically spot-welded, arc welded, and finally TIG welded on our purpose-made jigs using 36 alignment points.
Made in the United Kingdom
All our bulkheads are drawn, parts manufactured, assembled and surface finished with red-oxide primer, made in United Kingdom to ensure consistent quality standards.
5 Year Warranty
Our in-house quality system ensures all parts are manufactured and assembled correctly.
100
Day ReturnsMade to fit exactly like the original manufacturers specification; endorsed by classic car insurers and for your extra peace of mind we offer you a 100 day return.
Fast Secure Shipping
We ship worldwide right to your door.
All our bulkheads ship from our UK warehouse so shipping cost depends on the country of destination.
For a shipping cost please add your item to Cart and enter your address at Checkout.
Alternatively please Contact Us today for a shipping quote.
Get in touch with Pegasus Bulkheads
Our technical experience always comes in useful, if you need some friendly advice contact us!
