under development

1983 to 1990 defender 90/110

Price: £2600.00 (£3120 inc VAT)

TECHNICAL SPECIFICATIONS

production dates 1983 to 1990 - defender 90/110

Over the course of production, The Rover Co. engineers made multiple incremental improvements to their bulkheads, but only ever used two Part Numbers, so Pegasus has introduced 'Type' numbers designed to easily identify which bulkhead you require, based on the month and year of when your Land-Rover went into production.  

The following dates (listed below) are provisional and are based on actual production dates. The Vehicle Registration date is no guide to the Build Date.

how to identify your bulkhead type. It's as easy as 1, 2, 3!

identify the type of bulkhead you require

Select from the list below the month and year your Land-Rover went into production. Refer to the build date in your log book or heritage certificate. 

use the check list to review significant features

If you are unsure of the exact production date, use the drop down list below to reveal significant features against your old bulkhead.

buy online and we will arrange the shipping

Place your order by clicking on the drop down list (+ sign) and select BUY NOW or contact us today if you need further assistance.

It is the finer details that make the perfect restoration and perfection is all we accept at Pegasus Bulkheads.

BUY NOW - 90/110, 4-cylinder or V8, 1983 to 1984?

New manufactured bulkhead, built to our usual high quality.

Provisional specification:

  • For models with exterior bonnet lock. No bonnet lock release cable or bracket fitted.
  • Twin washer jets fitted in lieu of opposite handed wiper spindles.
  • No interior lamp switches in door pillars.
  • Exterior wrapped footwell side panels and 'Series' type top flange construction.
  • Top of front wings secured to bulkhead with stud plate and 2 off M6 nuts.

Equivalent. to RTC 6267 and RTC 6268.

Seen fitted to AA217261, first registered October 1984.

Not sure which bulkhead you require? We’re here to help. Contact Us or call 0044 1737 301483.

BUY NOW - 90/110, 4-cylinder or V8, 1984 to ?

New manufactured bulkhead, built to our usual high quality.

Provisional specification:

  • For models with bonnet lock release cable.
  • Twin washer jets fitted in lieu of opposite handed wiper spindles.
  • No interior lamp switches in door pillars.
  • Exterior wrapped footwell side panels and 'Series' type top flange construction?
  • Top of front wings secured to bulkhead with stud plate and 2 off M6 nuts.

Equivalent. to RTC 6267 and RTC 6268.

Supplied in Red Oxide primer paint finish.

Not sure which bulkhead you require? We’re here to help. Contact Us or call 0044 1737 301483.

BUY NOW - 90/110, 4-cylinder or V8, 1987 to ?

New manufactured bulkhead, built to our usual high quality.

Provisional specification:

  • For models with bonnet lock release cable.
  • Twin washer jets fitted in lieu of opposite handed wiper spindles.
  • No interior lamp switches in door pillars.
  • Exterior wrapped footwell side panels and 'Series' type top flange construction?
  • Top of front wings secured to bulkhead with M6 weld nut and 1 off M6 x 20 Set Screw. (Fitted from VIN 321735 onwards)

 

Equivalent. to RTC 6267 and RTC 6268.

Not sure which bulkhead you require? We’re here to help. Contact Us or call 0044 1737 301483.

BUY NOW - 90/110, 4-cylinder or V8, 1987 to 1991

New manufactured bulkhead, built to our usual high quality.

Provisional specification:

  • For models with bonnet lock release cable.
  • Single central washer jet fitted.
  • Round interior lamp switches in door pillars. (Fitted up to VIN HA903278)
  • Interior wrapped footwell side panels.
  • Top of front wings secured to bulkhead with M6 weld nut and 1 off M6 x 20 Set Screw. (Fitted from VIN 321735 onwards)

Equivalent. to ALR 6374 and ALR 6375.

Not sure which bulkhead you require? We’re here to help. Contact Us or call 0044 1737 301483.

BUY NOW - 90/110, 200 TDi, 1991 to 1994

Provisional specification:

  • With bonnet release cable bracket.
  • Ventilator panels punched for central washer jet.
  • Footwell side panels punched for oval interior lamp switches.
  • Interior wrapped footwell side panels.

This bulkhead variant is currently under development.

Not sure which bulkhead you require? We’re here to help. Contact Us or call 0044 1737 301483.

BUY NOW - 90/110, 300 TDi, 1995 to 1997

This bulkhead variant is currently under development.

Not sure which bulkhead you require? We’re here to help. Contact Us or call 0044 1737 301483.

JIG ALIGNED

Assembled on several major assembly jigs, which locate key mounting points
throughout the build process,

PRIMER COATED

Surface finished with red-oxide primer, ready for the next paint process.

READY TO FIT

Made to fit exactly like the original manufacturers specification; endorsed by classic car insurers.

PEGASUS FINEST DETAILING

Not only will your bulkhead fit like the original, last like it's original, it has all the same features as the original too!

OUR PROCESS

"We would like to think, that if one of the original assembly workers at the Rover factory in Solihull, viewed our bulkheads today, he would find it very difficult to detect any differences to the original".

MADE STIFFER, STRONGER AND CORROSION FREE

Our parts are fabricated with minimal pressing, preserving metal thickness. Using modern design and materials, we have improved performance by strengthening and stiffening weak points by 50% compared to the original bulkhead. This means that not only does the bulkhead maintain its original appearance, but it is also more durable and long-lasting.

INDIVIDUAL COMPONENTS

We utilize our own designs and patterns to cut and shape the final parts. We have invested in advanced tooling to create a bulkhead that is comparable to Rover's original engineering. Pegasus have extensive experience in sheet metal work and are able to replicate all original pressing details, holes, spire nut locations, and footwell ribs.

SPOT WELDED LIKE THE ORIGINALS

Pegasus bulkheads are constructed using the same spot welding method as the original bulkheads. The majority of the parts are joined together using spot or TIG welding to create sub-assemblies, which are then assembled into the final assembly. To ensure precise bulkhead geometry, the assembly is constructed on a 36 reference point jigs.

FINAL STAGE TIG WELDED

Pegasus utilize TIG welding on the final assembly for heavy-duty brackets, lap joints, and butt joints. The heavy-duty brackets such as the bonnet hinges, tie rod brackets, and bottom feet are also welded into place using TIG welding to replicate the original oxy-acetylene welding method. We maintain the highest standards in our manufacturing process and have complete control over the quality of each finished bulkhead.

WHY CHOOSE PEGASUS?

Technical excellence, outstanding craftmanship and an inexhaustible supply of Land-Rover knowledge.

When you choose Pegasus, you’re choosing a passion for perfection.

Made by hand in the UK, Pegasus have completed extensive research to the point where we can identify exactly which type of bulkhead you require, based on the year and month your Land-Rover went into production.

Each part has been reverse-engineered and accurately CAD drawn, generating very precise manufacturing drawings to replicate Rover's original specifations.

All component parts are laser cut and CNC folded. The bulkhead assembly is then authentically spot-welded, arc welded, and finally TIG welded on our purpose-made jigs using 36 alignment points.

MADE IN UNITED KINGDOM

All our bulkheads are drawn, parts manufactured, assembled and surface finished with red-oxide primer, made in United Kingdom to ensure consistent quality standards.

5 YEAR WARRANTY

Our in-house quality system ensures all parts are manufactured and assembled correctly.

100 DAY RETURNS

Made to fit exactly like the original manufacturers specification; endorsed by classic car insurers and for your extra peace of mind we offer you a 100 day return.

FAST SECURE SHIPPING

UK shipping from only £250 and Europe £300, which includes a certified wooden crate to protect your bulkhead in transit.

For the rest of the world we offer a Worldwide Door-to-Door Delivery service. Contact Us today for a shipping quote.