Pb231204 Winter Sale Badge V2
Keeping Your Land-Rover's True Identity
1967 to 1971

Series 2A 109 " 6 cylinder bulkheads

Price: £2600.00 (£3120 inc VAT)

Technical Specifications

Production Dates
1948 to 1953 - 80" Series 1 Bulkhead

Over the course of production, The Rover Co. engineers made multiple incremental improvements to their bulkheads, but only ever used two Part Numbers, so Pegasus has introduced ‘Type’ numbers designed to easily identify which bulkhead you require, based on your vehicles production date.

The dates are provisional and are based on actual production dates. The Vehicle Registration date is no guide to the Build Date.

Unlike Series 2a, 4-cylinder bulkheads, Pegasus Bulkheads manufacture and supply the 6-cylinder bulkhead in ‘handed’ configuration, i.e. supplied pre-fitted with the correct Toe Plates and Cover Plates.

Toe Plates and Cover Plates are supplied loose to enable surface treatment and painting of all faces.

Use the drop down bars below to check the ‘significant features’ on your bulkhead and find out which type fits your Land-Rover:

how to identify your bulkhead type

  1. 1

    choose the exact copy of your original bulkhead

    Select from the list below the month and year your Land-Rover went into production. Refer to your heritage certificate or click here to review your Land-Rover’s build date.
  2. 2

    use the check list to review significant features

    If you are unsure of the exact production date, use the drop down list below to reveal significant features against your old bulkhead.
  3. 3

    buy online and we will arrange the shipping

    Place your order by clicking on the drop down lists below and select 'Order This Bulkhead' or contact us today if you need further assistance.

It is the finer details that make the perfect restoration and perfection is all we accept at Pegasus Bulkheads

Suitable only for Series 2a, 6-cylinder models, ROW LHD models.

Remanufactured to our usual high specification.

For identification purposes, this version of the 6-cylinder bulkhead features the following:

  • Angled tie rod brackets.
  • Pressing in rear of glovebox to allow clearance for square body wiper motor.
  • Captive nut plates for door hinge fastening.
  • 338085, Plate for Pedals, all LHD, upto vehicle suffix ‘F’ (Remote brake servo models)
  • 338088, Cover Plate for RH Toe Panel, ROW LHD models

Note: Type 6 bulkheads may only have originally been built as ‘Remote’ brake servo models.

 

Our Land-Rover Series 2a (1967 to 1968) Bulkheads

These bulkheads are not mass produced or a ‘one-size-fits-all’.  They are specifically built to replicate the exact look and feel of Land-Rover’s signature design; specially made to order for you in our UK factory. All of our bespoke bulkheads are surface finished in an e-coating as standard. No matter what quality you choose, you’ll be getting an exceptional well built bulkhead that will increase the expected life span of your Land-Rover by at least another 30 years.

Proudly Made In The UK

Our bespoke bulkheads, on average, typically take 7 working days to make in our UK factory and ready for delivery. Once complete your bulkhead will be packaged up and delivered ready to sit perfectly on your Land-Rover Series 2a chassis. Say goodbye to long lead times and quality issues. Every step of our bulkhead production is carried out in England.

For identification purposes, this version of the 6-cylinder bulkhead features the following:

  • Angled tie rod brackets.
  • Pressing in rear of glovebox to allow clearance for square body wiper motor.
  • Captive nut plates for door hinge fastening.
  • 338086, Plate for Pedals, all RHD, up to vehicle suffix ‘F’ (Remote brake servo models)
  • 338091, Cover Plate for LH Toe Panel, RHD models

Note: Type 6 bulkheads may only have originally been built as ‘Remote’ brake servo models.

 

Our Land-Rover Series 2a (1967 to 1968) Bulkheads

These bulkheads are not mass produced or a ‘one-size-fits-all’.  They are specifically built to replicate the exact look and feel of Land-Rover’s signature design; specially made to order for you in our UK factory. All of our bespoke bulkheads are surface finished in an e-coating as standard. No matter what quality you choose, you’ll be getting an exceptional well built bulkhead that will increase the expected life span of your Land-Rover by at least another 30 years.

Proudly Made In The UK

Our bespoke bulkheads, on average, typically take 7 working days to make in our UK factory and ready for delivery. Once complete your bulkhead will be packaged up and delivered ready to sit perfectly on your Land-Rover Series 2a chassis. Say goodbye to long lead times and quality issues. Every step of our bulkhead production is carried out in England.

For identification purposes, this version of the 6-cylinder bulkhead features the following:

  • Straight tie rod brackets.
  • No pressing in rear of glovebox. Round body wiper motor fitted with clamp.
  • Door hinges secured with captive J-nuts.
  • 345637, Plate for Pedals, all LHD, from vehicle suffix ‘G’ (Direct coupled brake servo models)
  • 338088, Cover Plate for RH Toe Panel, ROW LHD models

 

Our Land-Rover Series 2a (1969 only) Bulkheads

These bulkheads are not mass produced or a ‘one-size-fits-all’.  They are specifically built to replicate the exact look and feel of Land-Rover’s signature design; specially made to order for you in our UK factory. All of our bespoke bulkheads are surface finished in an e-coating as standard. No matter what quality you choose, you’ll be getting an exceptional well built bulkhead that will increase the expected life span of your Land-Rover by at least another 30 years.

Proudly Made In The UK

Our bespoke bulkheads, on average, typically take 7 working days to make in our UK factory and ready for delivery. Once complete your bulkhead will be packaged up and delivered ready to sit perfectly on your Land-Rover Series 2a chassis. Say goodbye to long lead times and quality issues. Every step of our bulkhead production is carried out in England.

October 1969 onwards

For identification purposes, this version of the 6-cylinder bulkhead features the following:

  • Straight tie rod brackets.
  • No pressing in rear of glovebox. Round body wiper motor fitted with clamp.
  • Door hinges secured with captive J-nuts.
  • 345636, Plate for Pedals, all RHD, from vehicle suffix ‘G’ (Direct coupled brake servo models)
  • 338091, Cover Plate for LH Toe Panel, RHD models

 

Our Land-Rover Series 2a (1969 onwards) Bulkheads

These bulkheads are not mass produced or a ‘one-size-fits-all’.  They are specifically built to replicate the exact look and feel of Land-Rover’s signature design; specially made to order for you in our UK factory. All of our bespoke bulkheads are surface finished in an e-coating as standard. No matter what quality you choose, you’ll be getting an exceptional well built bulkhead that will increase the expected life span of your Land-Rover by at least another 30 years.

Proudly Made In The UK

Our bespoke bulkheads, on average, typically take 7 working days to make in our UK factory and ready for delivery. Once complete your bulkhead will be packaged up and delivered ready to sit perfectly on your Land-Rover Series 2a chassis. Say goodbye to long lead times and quality issues. Every step of our bulkhead production is carried out in England.

(Federal Specification) only available as LHD configuration

For identification purposes, this version of the 6-cylinder bulkhead features the following:

  • Angled tie rod brackets.
  • Pressing in rear of glovebox to allow clearance for square body wiper motor.
  • Captive nut plates for door hinge fastening.
  • Large holes in RH Glove Box Bottom Panel and Parcel Shelf for 2″ demister tubes.
  • 338085, Plate for Pedals, all LHD, upto vehicle suffix ‘F’ (Remote brake servo models)
  • PSK 3227, Cover Plate for RH Toe Panel, NADA Heater models

 

Our Land-Rover Series 2a NADA (Federal Specification only) Bulkheads

These bulkheads are not mass produced or a ‘one-size-fits-all’.  They are specifically built to replicate the exact look and feel of Land-Rover’s signature design; specially made to order for you in our UK factory. All of our bespoke bulkheads are surface finished in an e-coating as standard. No matter what quality you choose, you’ll be getting an exceptional well built bulkhead that will increase the expected life span of your Land-Rover by at least another 30 years.

Proudly Made In The UK

Our bespoke bulkheads, on average, typically take 7 working days to make in our UK factory and ready for delivery. Once complete your bulkhead will be packaged up and delivered ready to sit perfectly on your Land-Rover Series 2a NADA chassis. Say goodbye to long lead times and quality issues. Every step of our bulkhead production is carried out in England.

Pegasus finest detailing

Manufactured To Match The Year And Month Your Land-Rover Went Into Production

Not only will your bulkhead fit like the original, last like it’s original, it has all the same features as the original too!

Help Land-Rover celebrate their 75th anniversary in 2023
Pegasus Parts Red Oxide Bh S2a Type 4 Engine Side On Parcel Shelf 180118

SERIES 2/2a

'Finger Tip' press feature and hole for Wiper Motor Socket on the Parcel Shelf Z-Piece.
Pegasus Parts Red Oxide Bh S2a Type 4 Cab Side Parcel Shelf 180118

SERIES 2/2A

'Plunged' hole for Round Heater Demister tube. This feature carries over to later bulkheads with the 'Flat' heater.
Series 2 2a Rain Channel

SERIES 2/2A

Rain Channel, with the correct formed hemmed lip.
Pegasus Parts Red Oxide Bh S2a Type 4 Door Pillar Cab Side View 180118

SERIES 2/2A

Correct style door pillars with door seal channel extending the full height.
Series 2 2a Spire Nuts

SERIES 2/2A

Pressed recess for panel Spire nuts on the gear box tunnel.
Series 2 2a Door Check Tubes

SERIES 2/2A

Door Check Tube End Caps. Press formed on our own tooling.
Series 2 2a Footwells

SERIES 2/2A

Footwells with the original style pressed ribs.
Series 2 2a Signature Strip

SERIES 2/2A

And finally look out for our signature strip, with your bulkheads very own laser cut serial number
Pegasus Bulkheads Series 2 Wiper Motor Feature

Wiper Motor Pic

Land-Rover used this wiper motor feature for only two years in the 1960's until another update was made!
Pegasus Bulkheads Series 2 Detailing Img11

Conversion Kits

You may have an exceptionally rare model, in which case we have the correct conversion kit
Pegasus Bulkheads Shipping Crate Img11

Secure Shipping

Bulkheads leave us in a securely packed and certified wooden crate for protection in transit

Our Process

“We would like to think, that if one of the original assembly workers at the Rover factory in Solihull, viewed our bulkheads today, he would find it very difficult to detect any differences to the original”.

Why Choose Pegasus?

Technical excellence, outstanding craftmanship and an inexhaustible supply of Land-Rover knowledge.

When you choose Pegasus, you’re choosing a passion for perfection.

Made by hand in the UK, Pegasus have completed extensive research to the point where we can identify exactly which type of bulkhead you require, based on the year and month your Land-Rover went into production.

Each part has been reverse-engineered and accurately CAD drawn, generating very precise manufacturing drawings to replicate Rover’s original specifications.

All component parts are laser cut and CNC folded. The bulkhead assembly is then authentically spot-welded, arc welded, and finally TIG welded on our purpose-made jigs using 36 alignment points.

  • Made in the United Kingdom

    All our bulkheads are drawn, parts manufactured, and assembled in the United Kingdom to ensure consistent quality and high standards.

  • 5 Year Warranty

    Our in-house quality system ensures all parts are manufactured and assembled correctly.

  • 100
    Day Returns

    Made to fit exactly like the original manufacturers specification; endorsed by classic car insurers and for your extra peace of mind we offer you a 100 day return.

  • Fast Secure Shipping

    We ship worldwide right to your door.
    All our bulkheads ship from our UK warehouse so shipping cost depends on the country of destination.

    For a shipping cost please add your item to Cart and enter your address at Checkout.

    Alternatively please Contact Us today for a shipping quote.

customer feedback

  • Pegasus Bulkheads Logo Png Format 150x150

    Jim

    Ohio, United States

    Land Rover Nada 6 Cylinder Bulkhead

    Pegasus provided many of the parts that made the restoration possible.

  • Pegasus Bulkheads Logo Png Format 150x150

    Gordon

    Bristol, UK

    Land-Rover Series 2 Bulkhead

    I am a very happy bunny and a satisfied customer of Pegasus.

  • Pegasus Bulkheads Logo Png Format 150x150

    Chris and Linda

    Late Series 1 Bulkhead

    ... found that everything lined up perfectly. The doors fit and close, the windscreen fits, the vent flaps and seals fit, the door seals fit - a great result!

  • Pegasus Bulkheads Logo Png Format 150x150

    John from New Zealand, 22nd December 2021

    Land-Rover Forward Control 2B bulkhead

    Just a line to let you know that the Land-Rover Forward Control 2B bulkhead arrived today ! Hoorah !! .... The crate was certainly up to the job, thank you!

  • Get in touch with Pegasus Bulkheads

    Our technical experience always comes in useful, if you need some friendly advice contact us!

    Series 1 Land Rover In Country Field

    Send Us a Message

    UK Contact Form

    Contact Information

    Address

    Unit 5F, Toledo Road, Triumph Business Park, Liverpool, L24 9AE

    Office Hours

    Monday - Friday 9.00am to 5.00pm